How to Hang a Jonathan Adler Faces Wall Art Panel

By Michaels Canada | Published: 2026-10-20

Category: How-to Guides

Learn the best way to hang the Jonathan Adler x Michaels Faces Wall Art panel—from choosing the right hardware to leveling it perfectly. Includes step-by-step instructions and common mistakes to avoid.

Quick answer

For the Jonathan Adler x Michaels Faces Wall Art panel, use two adhesive hooks or a drywall anchor and screw, depending on your wall type. Always measure and level carefully to avoid a crooked display.

Choose the Right Hardware for Your Wall

Before you start, decide between adhesive hooks and a drywall anchor. Adhesive hooks work well on smooth, painted walls and leave no holes, but they may not hold on textured or humid surfaces. A drywall anchor and screw provide a more secure hold, especially if you plan to move or rearrange the panel often.

The Jonathan Adler x Michaels Faces Wall Art panel is a lightweight piece, so heavy-duty anchors are not necessary. However, always check the panel's weight and the wall surface before choosing your hardware.

Why Leveling Matters More Than You Think

A slightly tilted panel can throw off the entire composition, especially if you're hanging it above a console or in a gallery wall. The bold mid-century design of the Faces Wall Art makes any tilt obvious, so take the extra minute to level it.

If you're hanging the panel near other décor, a small leveling error becomes more noticeable. Use a laser level or a standard bubble level to ensure the piece sits perfectly straight.

Choosing the Right Hardware for Your Wall Type

The Jonathan Adler x Michaels Faces Wall Art panel is lightweight, so most walls won't need heavy-duty anchors. For drywall, a simple picture hook or adhesive strip works well. For plaster or concrete, use a masonry anchor or a hammer-in hook rated for the panel's weight.

If you prefer a floating frame look without visible wires, consider using two adhesive hooks or a French cleat. These options keep the panel flush against the wall and make leveling easier.

Step-by-Step Hanging Guide

Gather your tools: You'll need a measuring tape, pencil, level, stud finder (optional), and the right hardware. For drywall without a stud, use a drywall anchor rated for the panel's weight. If you prefer a no-drill option, choose adhesive hooks designed for wall art—but check the weight rating first. Always confirm the weight rating of your hardware before hanging.
Mark the position: Hold the panel where you want it and use a pencil to mark the top edge and the center point. Use a level to draw a light horizontal line—this is your guide for the hangers. Use a pencil line you can erase later; avoid marking on textured wallpaper.
Choose the right hanging method: For a lightweight panel like this, adhesive hooks or picture-hanging strips work well on smooth surfaces. For drywall, use a drywall anchor and screw for extra security, especially if the wall is textured or the panel is heavy. Check the panel's weight before choosing hardware; if in doubt, use a drywall anchor.
Mark the hanging points: Hold the panel against the wall at your desired height. Use a pencil to mark the top edge center, then measure the distance between the hanging hardware on the back. Transfer that measurement to the wall, keeping the marks level. Use a level to draw a faint horizontal line—this prevents crooked placement.
Install the hardware: Choose a drywall anchor for hollow walls or a stud-mounted screw for solid support. For lightweight panels, adhesive hooks can work on smooth surfaces, but always check the panel's weight first. If using adhesive hooks, clean the wall with rubbing alcohol and wait 30 minutes before hanging.
Hang and level the panel: Place the panel on the hooks or screws, then use a spirit level to check it. Adjust the wire or hook position slightly if needed. Step back and eyeball it from across the room. Use a pencil mark at the top edge as a reference; remove it after leveling.

About the Jonathan Adler Faces Wall Art

Jonathan Adler x Michaels 18.5" Faces Wall Art: This limited edition piece from the Jonathan Adler x Michaels collection features a mid-century modern design with colorful faces. The bold, colorful design means the panel can serve as a focal point, so precise leveling and placement are especially important to let the art shine.
Jonathan Adler x Michaels 18.5" Faces Wall Art